基于秩序与非秩序理论的文创产品卡通形象设计研究

目的 从秩序与非秩序理论出发,研究文创产品卡通形象的设计方法.方法 对秩序与非秩序理论的视觉机制和创制理论进行梳理,结合实例,阐述了其与文创产品卡通形象设计之间的联系,分析文创产品卡通形象中的秩序与非秩序的表现形式,提出基于秩序与非秩序理论文创产品卡通形象设计的主要原则,归纳出一套基于秩序与非秩序理论的文创产品卡通形象设计流程与方法,指导设计实践,并验证这些理论方法在设计实践中有效性与可行性.结论 通过对秩序与非秩序理论的研究,文创产品卡通形象设计时应注意提高辨识度、亲和力和便于衍生设计的原则.探索基于秩序与非秩序理论的设计流程与方法,按照界定主题、主体形象设计、主体形象拓展、衍生品应用四个环节开展整体方案设计,为文创产品卡通形象设计提供新的思路与方法.     

基于魅力工学的传统器物设计评价应用研究

目的 在传统器物的创新设计中,最重要的环节是了解消费者对所使用产品的不同感受与意向并转换为具体的设计要素.研究消费者心理的感性因素与传统器物设计元素之间的联系,确定设计要素,从而对产品进行创新设计,为提升传统器物附加值作出贡献.方法 以中国传统器物茶宠为例,首先对8位相关的茶宠专家进行访谈,通过魅力工学中的评价构造法整理并提取魅力因子,设计出问卷调查表;然后以访谈内容为依据,使用问卷调查法得到大众对茶宠的魅力评价,共回收84份有效问卷;最后应用数量化一类分析茶宠魅力因子影响权重.结果 得到了数量化一类统计表,选取了其中影响因素较大的魅力因子作为茶宠设计前的风格定调考量.结论 通过茶宠的研究案例证明了该理论的可行性,为未来传统器物的设计提供了更多元且新颖的设计依据.     

Progressive failure analysis of notched composite plate by utilizing macro mechanics approach

In this study, gradual and sudden reduction methods were combined to simulate a progressive failure in notched composite plates using a macro mechanics approach. Using the presented method, a progressive failure is simulated based on a linear softening law prior to a catastrophic failure, and thereafter, sudden reduction methods are employed for modeling a progressive failure. This combination method significantly reduces the computational cost and is also capable of simultaneously predicting the first and last ply failures (LPFs) in composite plates. The proposed method is intended to predict the first ply failure (FPF), LPF, and dominant failure modes of carbon/epoxy and glass/epoxy notched composite plates. In addition, the effects of mechanical properties and different stacking sequences on the propagation of damage in notched composite plates were studied. The results of the presented method were compared with experimental data previously reported in the literature. By comparing the numerical and experimental data, it is revealed that the proposed method can accurately simulate the failure propagation in notched composite plates at a low computational cost.     

基于工程状态标定的诊断载荷试验识别方法及应用

针对在役公路梁式桥梁由于材料性能退化及外部环境等因素共同作用而导致承载力不足、耐久性降低等问题,开展旧桥力学性能的快速诊断试验研究。通过诊断性载荷试验的理论分析和有限元模型标定流程研究,快速、高效地完成在役公路桥梁的承载力性能测量和评估,从而为在役公路桥梁结构的养护管理提供可靠的技术支持。     

Effect of Newtonian heating/cooling on free convection in an annular permeable region in the presence of heat source/sink

The influence of Newtonian heating/cooling in the presence of heat source/sink has been investigated on laminar free convective flow in a vertical annular permeable region. The mathematical model for the problem has been considered as a boundary value problem consisting of two simultaneous ordinary differential equations. The boundary value problem has been transformed to nondimensional form. This has given rise to a number of parameters representing both geometrical and physical features of the problem. Closed‐form analytical solutions of the governing equations have been obtained for two different cases of internal heat generation/absorption. To assess the effects of governing parameters on the fluid velocity and temperature, a number of profiles of these field variables have been presented. The efficacy of the distinct processes on the field variables has been discussed extensively. The main outcome obtained in this study is that the velocity as well as temperature is enhanced in the case of the Newtonian heating while the opposite behavior occurs in the Newtonian cooling for both cases of source and sink. Furthermore, the influence of the governing parameters has been shown on the skin friction, volume flow rate, and the Nusselt number.     

LBM investigation of a Cu-water nanofluid over various configurations of pipes in the mixed convection flow

Increasing the heat capacity of heat exchangers is a crucial need for modern devices. The thermal conductivity of the usual fluids and the Nusselt (Nu) number of flows containing such fluids are two bottlenecks in the way of increasing heat delivery in the heat exchangers. For this reason, nanofluids have been introduced. The effect of utilizing a Cu-water nanofluid as a coolant of two hot pipes in a square cavity is investigated numerically with a two-component lattice Boltzmann method. The volume fraction of nanoparticles is assumed to be constant (0.03) while the Richardson (Ri) number varies from 0.02 to 20. Results show that the effectiveness of nanoparticles is better observed in the natural convection mode. However, sedimentation is also very probable at high Ri numbers, which significantly reduces the effectiveness of the nanoparticles. Configurations which produce a natural convection stream similar to the forced convection one as well as the configurations with high spacing and hence, low heat stream interactions, are the best choices for a uniform heat rate from the pipes.     

Radiation and slip effects on MHD Maxwell nanofluid flow over an inclined surface with chemical reaction

The numerical solutions of the upper-convected Maxwell (UCM) nanofluid flow under the magnetic field effects over an inclined stretching sheet has been worked out. This model has the tendency to elaborate on the characteristics of “relaxation time” for the fluid flow. Special consideration has been given to the impact of nonlinear velocity slip, thermal radiation and heat generation. To study the heat transfer, the modified Fourier and Fick's laws are incorporated in the modeling process. The mass transfer phenomenon is investigated under the effects of chemical reaction, Brownian motion and thermophoresis. With the aid of the similarity transformations, the governing equations in the ordinary differential form are determined and then solved through the MATLAB's package “bvp4c” numerically. This study also brings into the spotlight such crucial physical parameters, which are inevitable for describing the flow and heat transfer behavior. This has been done through graphs and tables with as much precision and exactitude as is possible. The ascending values of the magnetic parameter, the Maxwell parameter and the angle of the inclined stretching sheet cause decay in the dimensionless velocity while an assisting behavior of the thermal and concentration buoyancy parameters is noticed.     

An experimental study of forced convective heat transfer for fully developed Al 2 O 3 –water nanofluid in an annulus tube

Nanofluids have been known as practical materials to ameliorate heat transfer within diverse industrial systems. The current work presents an empirical study on forced convection effects of Al₂O₃–water nanofluid within an annulus tube. A laminar flow regime has been considered to perform the experiment in high Reynolds number range using several concentrations of nanofluid. Also, the boundary conditions include a constant uniform heat flux applied on the outer shell and an adiabatic condition to the inner tube. Nanofluid particle is visualized with transmission electron microscopy to figure out the nanofluid particles. Additionally, the pressure drop is obtained by measuring the inlet and outlet pressure with respect to the ambient condition. The experimental results showed that adding nanoparticles to the base fluid will increase the heat transfer coefficient (HTC) and average Nusselt number. In addition, by increasing viscosity effects at maximum Reynolds number of 1140 and increasing nanofluid concentration from 1% to 4% (maximum performance at 4%), HTC increases by 18%.     

Stress wave propagation in adhesively bonded functionally graded cylinders: an improved model

This study presents an improved mathematical model to analyse the stress wave propagation in adhesively bonded functionally graded (FG) circular cylinders (butt joint) under an axial impulsive load. The volume fractions of the material constituents in the upper and lower cylinders were functionally tailored through the thickness of each cylinder using a power-law. The effective material properties of both cylinders, which are made of aluminum (Al) and silicon carbide (SiC), at any point were predicted by using the Mori–Tanaka homogenization scheme. In this improved model, the governing equations of the wave propagation include the spatial derivatives of local mechanical properties and were discretized by means of the finite difference method. The influence of these spatial derivatives and the compositional gradient exponent on the displacement and stress distributions of the joint was investigated. The material composition variations of both cylinders affected the displacement and stress fields whereas the compositional gradient exponent had a minor effect. The stress concentrations were alleviated in time, the displacement and stress distributions/variations around/along the upper and lower cylinder-adhesive interfaces were significantly affected by the adhesive layer. The spatial derivatives also affected the temporal histories of the displacement and stress components evaluated at the selected critical points of the upper cylinder, adhesive layer and lower cylinder. The consideration of the spatial local material derivatives provided a more accurate mathematical model of wave propagations through the graded layered structures.